Reduces 40mm pipe down to 32mm. Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Specifications: BS EN 1455 - 1: 2000

Installs easily where access is limited. Reduces 40mm pipe down to 32mm. Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint.

450mm screw-down cover and frame. For use with 450mm inspection chambers with depth that exceeds 1.2m. Can also be used as a sealed cover.

250ml. Chemically bonds certain types of plastic coving or trunking. For use with solvent weld waste products. Can achieve up to 55 joints per tub. Supplied with brush applicator. Manufactured to BS6209.

For use at the end of a pipe run or at a branch to create an access point.

For use at the base of a soil stack to take up excessive expansion.

Solvent weld waste system. Black.

Solvent weld waste system. Black.