Pack of 10 x 2m straight lengths of white 15mm PEX Barrier Pipe. Specifications: Compatible with all plumbing fittings manufactured to BS 7291

Pack of 10 x 3m straight lengths of white 15mm PEX Barrier Pipe. Specifications: Compatible with all plumbing fittings manufactured to BS 7291

Pack of 10 x 2m straight lengths of white 22mm PEX Barrier Pipe. Specifications: Compatible with all plumbing fittings manufactured to BS 7291

Pack of 10 x 3m straight lengths of white 22mm PEX Barrier Pipe. Specifications: Compatible with all plumbing fittings manufactured to BS 7291

Pack of 10 x 3m straight lengths of white 28mm PEX Barrier Pipe. Specifications: Compatible with all plumbing fittings manufactured to BS 7291

High quality ABS fittings. Made in polypropylene, this is a quick and easy to install waste system incorporating a push-fit ring seal system. No solvent welding required. Fits all standard size waste pipe (excluding solvent weld waste). Fix pipe clips at maximum 1.2m centres vertical and at maximum 0.5m centres horizontal for 32mm and 40mm, 0.6m centres for 50mm. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Use with ABS fittings. A lightweight yet strong and cost-effective option. Fix pipe clips at max 1.2m centres vertical and max 0.5m centres horizontal for 32mm and 40mm, 0.6m centres for 50mm. No expansion gap required on the solvent weld overflow system. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint.

Use with ABS fittings. A lightweight yet strong and cost-effective option. Fix pipe clips at max 1.2m centres vertical and max 0.5m centres horizontal for 32mm and 40mm, 0.6m centres for 50mm. No expansion gap required on the solvent weld overflow system. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Specifications: BS EN 1455-1: 2000