4 slotted: 5 x 100mm. 6 x 125mm. 8 x 150mm. 6 x 38mm stubby. 4 phillips: 0 x 75mm. 1 x 100mm. 2 x 125mm. 2 x 38mm stubby.

No load speed 6000rpm. 230mm disc diameter. 3 position side handle. Marquardt switch with soft start. Spindle lock. Soft grip handle. Rotating rear handle. 1 x 230mm stone cutting disc. 1 spanner. 1 allen key.

½in square drive with ½ x 3/8in square drive adaptor. Operating range 28 to 210 Newton metres. 5in extension bar. Tough storage case.

Operates from a 12V vehicle cigarette lighter socket. Inflates tyre from flat in 6 minutes 30 seconds based on a 14in tyre from 0-30psi. Complete with nozzle adaptor and sport needle. Inflation time will vary depending on the size of the tyre, climate, altitude, temperature and voltage level of vehicle/internal battery.

No load speed 4500rpm. 200mm TCT blade with 16mm bore. Table size 500 x 335mm. Cutting height 43mm. Blade bevel 0-45 degrees. Magnetic safety switch. Parallel guide.

Single speed 4500rpm. 185mm TCT blade. Cutting depth 64mm. Mitre cutting facility 0-45 degrees. Accessories included:1 x spanner. 1 x hex key. 1 x parallel guide. 1 x vacuum adaptor. 1 x blade, 185 x 20 x 24T.

Single speed 550rpm. 1 gear. 10mm keyless chuck. Includes 3 to 5 hour charger. 2 double ended bits on housing. Please note this product has 17 torque settings - not the 18 stated in some catalogues.

Model number MIP-ZP-300A. 400 watts. No-load speed 2350 RPM. Cutting width 30cm. Collection box capacity 20 litres. Cable length 6m. BS plug. Size (H)56, (W)52, (D)25cm.