Pack of 10 x 3m straight lengths of white 22mm PEX Barrier Pipe. Specifications: Compatible with all plumbing fittings manufactured to BS 7291

Pack of 10 x 3m straight lengths of white 28mm PEX Barrier Pipe. Specifications: Compatible with all plumbing fittings manufactured to BS 7291

High quality ABS fittings. Made in polypropylene, this is a quick and easy to install waste system incorporating a push-fit ring seal system. No solvent welding required. Fits all standard size waste pipe (excluding solvent weld waste). Fix pipe clips at maximum 1.2m centres vertical and at maximum 0.5m centres horizontal for 32mm and 40mm, 0.6m centres for 50mm. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Use with ABS fittings. A lightweight yet strong and cost-effective option. Fix pipe clips at max 1.2m centres vertical and max 0.5m centres horizontal for 32mm and 40mm, 0.6m centres for 50mm. No expansion gap required on the solvent weld overflow system. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint.

Use with ABS fittings. A lightweight yet strong and cost-effective option. Fix pipe clips at max 1.2m centres vertical and max 0.5m centres horizontal for 32mm and 40mm, 0.6m centres for 50mm. No expansion gap required on the solvent weld overflow system. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Specifications: BS EN 1455-1: 2000

Pipe Inserts.

Allows the free entry of air into the sanitary pipework system without the foul gasses escaping into the building. Avoids the need to penetrate outer roof shell. It is recommended that air admittance valves are not used externally as environmental debris will affect the air tightness performance of the valve. Push-fit connection. Remove seal from 110mm push-fit for 82mm solvent connection. Tested and approved for use in installation varying between -20° and +60°C (no insulation required). A1 approved in accordance with BS EN 12380, can be installed below the flood level of connected appliances. FloPlast are the first company in the world to be awarded the Kitemark for Air Admittance Valves in accordance with BS EN 12380:2002, licence number KM512474. Specifications: Manufactured to BS 12380: 2002.

Allows the free entry of air into the sanitary pipework system without the foul gasses escaping into the building. Avoids the need to penetrate outer roof shell. It is recommended that air admittance valves are not used externally as environmental debris will affect the air tightness performance of the valve. Push-fit connection. Remove seal from 110mm push-fit for 82mm solvent connection. Tested and approved for use in installation varying between -20° and +60°C (no insulation required). A1 approved in accordance with BS EN 12380, can be installed below the flood level of connected appliances. FloPlast are the first company in the world to be awarded the Kitemark for Air Admittance Valves in accordance with BS EN 12380:2002, licence number KM512474. Specifications: BS12380: 2002