Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. Fits most standard size waste pipe (excluding solvent weld waste). An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Simple and quick to connect, suitable for use below ground on cold water services. Resistant to pull-out. Excellent pressure resistance, tested to 48bar. Comfortably exceeds the performance requirements of UK Water Bylaws Scheme. MDPE Fittings are WRAS approved, certificate number 0507060. BS 6572: 1985.

For use at the base of rainwater down pipes to collect leaves and debris washed down the pipes from the guttering.

Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint.

High quality ABS fitting. Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint.

Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint.

Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint.

Range of white polypropylene Pan Connectors manufactured to BS 5627. Integral sealing diaphragm allows up to 5° misalignment in any direction.