Allows access into the waste system. Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint.

Fits all standard waste pipe (excl. universal push fit waste). Manufactured to BS EN 1455-1:2000 / BS 5255.

For use where access is required at a change of direction.

For use where access is required in a straight section, such as the base of a soil stack.

Converts 80mm downpipes to 110mm.

Universal Valve to fit standard 32, 40 and 50mm solvent weld waste pipe. Allows the free entry of air into the sanitary pipework system without the escape of foul gasses into the building. It is recommended that air admittance valves are not used externally as environmental debris will affect the air tightness performance of the valve. Tested and approved for use in installations varying between -20° and +60°C (no insulation required). A1 approved in accordance with BS EN 12380 - it can be installed below the flood level of connected appliances (100mm above connecting waste system). FloPlast are the first company in the world to be awarded the Kitemark for Air Admittance Valves in accordance with BS EN 12380:2002, licence number KM512474.

Fitted with environmental mesh to allow external installation.

Fitted with environmental mesh to allow external installation. Specifications: BS EN 12380