Double socket, removable centre stop for use as slip coupling. Joins two plain-ended underground pipe together. Strong, durable PVCu. Lightweight and easy to work with. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals facilitates jointing.

Suitable for gravity drainage and sewerage installations at depths of up to 10m. · To be solvent welded to plain ended pipe leaving a push fit joint. Strong, durable PVCu. Lightweight and easy to work with. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals facilitates jointing. BS 4660 BS EN 1401-1 1998.

Suitable for gravity drainage and sewerage installations at depths of up to 10m. Designed to plug any unused sockets. BS 4660 BS EN 1401-1 1998. Strong, durable PVCu. Lightweight and easy to work with. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals facilitates jointing.

Made in polypropylene, this quick and easy to install waste system incorporates a compression outlet that accepts plastic and copper pipes. Push-fit plain end into waste trap, and compression end onto 32mm pipe. No solvent welding required. Manufactured to BS5254, BS EN 1451-1: 2000.

Made in polypropylene, this quick and easy to install waste system incorporates a compression outlet that accepts plastic and copper pipes. Push-fit plain end into waste trap, and compression end onto 40mm pipe. No solvent welding required. Manufactured to BS5254, BS EN 1451-1: 2000.

Made from polypropylene, this quick and easy to install waste system incorporates a compression outlet that accepts plastic pipes to BS 5254 and BS 5255 and copper pipes to BS 659 and BS 2871. No solvent welding required. It is recommended that externally installed polypropylene waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Manufactured to BS5254, BS EN 1451-1: 2000.

Made from polypropylene, this quick and easy to install waste system incorporates a compression outlet that accepts plastic pipes to BS 5254 and BS 5255 and copper pipes to BS 659 and BS 2871. No solvent welding required. It is recommended that externally installed polypropylene waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Manufactured to BS5254, BS EN 1451-1: 2000.

Made from polypropylene, this quick and easy to install waste system incorporates a compression outlet that accepts plastic pipes to BS 5254 and BS 5255 and copper pipes to BS 659 and BS 2871. No solvent welding required. It is recommended that externally installed polypropylene waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Manufactured to BS5254, BS EN 1451-1: 2000.