Cast Iron Effect Socket Plugs, made from tough polypropylene. Easy to install, push fit seal system. Available in 32mm and 40mm sizes.

Easy to install, push fit seal system. Made from tough polypropylene. Available in 32mm and 40mm sizes.

Easy to install, push fit seal system. Made from tough polypropylene. Available in 32mm and 40mm sizes.

Allows rainwater and waste pipes to be connected to drainage systems. Use in conjunction with P traps. Includes a polypropylene grid.

Connects 40mm waste systems to 32mm waste systems. Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Reduces 40mm pipe down to 32mm. Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Specifications: BS EN 1455 - 1: 2000

Installs easily where access is limited. Reduces 40mm pipe down to 32mm. Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint.

450mm screw-down cover and frame. For use with 450mm inspection chambers with depth that exceeds 1.2m. Can also be used as a sealed cover.